Mitchell Harrill
Clinton
Summary
Highly-motivated employee with desire to take on new challenges. Strong work ethic, adaptability, and exceptional interpersonal skills. Adept at working effectively unsupervised and quickly mastering new skills.
Overview
8
8
years of professional experience
1
1
Certification
Work History
Plumber Pipefitter
UCOR
Oak Ridge
03.2023 - Current
- Collaborated with team members to streamline workflow on job sites, enhancing overall project efficiency.
- Ensured compliance with safety regulations during all installation tasks.
- Conducted inspections of piping systems, identifying leaks and defects to maintain system integrity.
- Coordinated with project managers to fulfill timeline requirements, ensuring timely project completion.
- Use hand tools such as saws, drills, wrenches, threaders, to perform tasks related to the job at hand.
- Measure, cut, thread, groove, bend and install piping according to specifications.
- Observed safe work rules and utilized fall protection and PPE.
- Read blueprints and diagrams to determine the type of pipe and tools needed for each job.
- Read and interpreted specifications, diagrams and blueprints for job.
- Handled all responsibilities for piping systems, including fabricating, assembling, installing and maintaining.
- Measured and marked pipes for cutting and threading.
- Collaborated with electricians and plumbers to facilitate project tasks.
- Threaded pipes using specified machinery.
- Threaded and installed pipe using pipe wrench and dies.
- Ensure compliance with safety regulations while performing assigned tasks.
- Inspect work areas to ensure that they are clean and free from obstructions.
- Installed piping systems for plumbing for both domestic and HVAC lines.
- Test plumbing systems for leaks using air pressure gauges or other testing devices.
- Repair or replace worn parts such as seals and bearings on pumps and valves.
- Troubleshoot malfunctioning systems by diagnosing issues with components such as valves or pumps.
- Managed movement of materials and equipment to different job sites.
- Provide technical advice regarding design specifications of piping systems.
- Filled pipes with water or air, observing pressure gauges, and pipes to troubleshoot and locate leaks.
- Modified piping systems with task-specific tools to complete preventive maintenance.
- Inspected installations to repair leaks and make adjustments to pipes.
- Shut off steam or other gases or liquids from pipes to conduct maintenance.
- Filled piping systems with water and air to test for leaks.
- Collaborated with team members to troubleshoot and resolve plumbing issues promptly.
Landscaper
Ridenour Landscaping
05.2018 - Current
- Working knowledge of zero-turn mowers, string trimmers, hedge trimmers, chainsaws, and leaf blowers; as well as performing small engine maintenance on all this equipment.
- Operated landscaping equipment including mowers, trimmers, and blowers safely.
- Cut and trimmed lawns using power mowers and edgers.
- Maintained and operated lawn care equipment such as mowers, trimmers, edgers, blowers, and hedge clippers.
- Cleaned up debris after completing jobsite tasks.
- Cleared pathways of overgrowth, debris, and snow to reduce hazards.
- Ensured proper disposal of all waste generated from job sites.
Millwright
Cherokee Millwright Inc
Clinton
03.2021 - 04.2023
- Installed and maintained machinery components for efficient operation.
- Conducted regular inspections to identify mechanical issues and perform repairs.
- Operated various hand and power tools for equipment assembly and repair.
- Followed safety protocols to ensure a safe working environment for all staff.
- Aligned motors, pumps, gearboxes, conveyors and other mechanical systems.
- Maintained clean and environmentally safe work area.
- Installed new equipment according to manufacturer specifications.
- Fabricated spare parts from raw materials such as steel bars or plates.
- Ensured safety regulations were followed while performing tasks.
- Assembled industrial machines using appropriate tools and techniques.
- Ran tests on newly installed machines to verify their optimal functioning.
- Lubricated moving parts of machinery at regular intervals to prevent breakdowns.
- Inspected and tested all machinery components to ensure proper functionality.
- Troubleshot problems with hydraulic systems and pneumatics.
- Moved heavy machinery and equipment using hoists, dollies, rollers, and trucks.
- Repaired or replaced defective parts, using hand tools and power tools.
- Used rigging, hoists and equipment to move heavy machinery between locations and complete installations.
Welder
Macaber Engineering
Maryville
12.2022 - 02.2023
- Inspected welds for quality and ensured compliance with safety standards.
- Collaborated with team members to improve welding techniques and processes.
- Maintained tools and equipment to ensure optimal performance during production.
- Interpreted blueprints and technical drawings for accurate fabrication tasks.
- Participated in regular safety meetings to promote a safe work environment.
- Conducted repairs on defective welds to meet production specifications.
- Maintained a clean working environment by removing scrap metal from work areas.
- Set up welding machines based on the job at hand.
- Repaired broken or cracked parts using cutting torches and welding equipment.
- Read blueprints, drawings related to projects in order to determine proper dimensions of components being fabricated, welded together.
- Used welding skills to help repair and maintain heavy-duty machinery.
- Set up equipment and welded parts according to welding chart specifications and type.
- Gathered required materials for each project in order to meet production deadlines.
- Followed safety guidelines through proper machine guarding and lockout and tagout procedures.
- Fabricated and welded components to assemble structural forms, such as machinery frames, tanks, pressure vessels, and furnace shells.
- Performed preventative maintenance on welding tools and equipment.
- Scraped off excess spatter using portable grinders and arc-cutting equipment.
- Operated manual and semi-automatic welding equipment in vertical, horizontal and overhead positions.
- Laid out, positioned, aligned and secured parts and assemblies with straightedges, squares and calipers.
- Completed minor torch ups with MIG welders.
- Applied shielded metal arc welding techniques with electrodes in flat, horizontal vertical positions as well as overhead applications.
- Operated manual or semi-automatic flame-cutting equipment to cut metal for fabrication of products.
- Troubleshot problems related to welds including porosity issues caused by improper shielding gas flow rates.
- Inspected completed work for conformance to specifications using various instruments.
- Utilized oxyacetylene torches for preheating metals prior to welding or bending them into desired shapes.
- Prepared broken parts for welding by properly grooving and scarfing surfaces.
- Adjusted settings on machines such as current level so it matches the specifications outlined in blueprints and drawings.
- Adjusted gas flow and pressure to create and maintain desired flames.
- Monitored the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
- Installed new plant equipment per manufacturer's instructions while adhering to safety protocols.
- Communicated effectively with supervisors regarding progress updates on assigned tasks.
- Prepared workpiece edges by grinding, cutting, buffing or bending to verify snug fit.
- Cut, contoured and beveled metal and structural shapes to achieve accurate dimensions.
- Measured workpieces with straightedges or templates to conform with specifications.
- Cleaned and inspected parts and assemblies at each production stage and documented production defects.
- Detected faulty operation of equipment or defective materials and notified supervisors.
- Safely ignited torches and monitored surroundings to proactively identify hazards.
- Recognized, set up, and operated shielded metal arc and gas metal arc welding equipment.
- Connected and turned regulator valves to activate and adjust gas flow and pressure and obtain desired flames.
- Marked or tagged material with job number, piece marks and other identifying marks.
- Selected and installed torches, filler rods and flux according to welding chart specifications.
Welder
National Partitons HQ
Knoxville
10.2022 - 11.2022
- Inspected welds for quality and ensured compliance with safety standards.
- Collaborated with team members to improve welding techniques and processes.
- Maintained tools and equipment to ensure optimal performance during production.
- Interpreted blueprints and technical drawings for accurate fabrication tasks.
- Participated in regular safety meetings to promote a safe work environment.
- Conducted repairs on defective welds to meet production specifications.
- Maintained a clean working environment by removing scrap metal from work areas.
- Set up welding machines based on the job at hand.
- Repaired broken or cracked parts using cutting torches and welding equipment.
- Read blueprints, drawings related to projects in order to determine proper dimensions of components being fabricated, welded together.
- Used welding skills to help repair and maintain heavy-duty machinery.
- Gathered required materials for each project in order to meet production deadlines.
- Followed safety guidelines through proper machine guarding and lockout and tagout procedures.
- Performed preventative maintenance on welding tools and equipment.
- Scraped off excess spatter using portable grinders and arc-cutting equipment.
- Operated manual and semi-automatic welding equipment in vertical, horizontal and overhead positions.
- Laid out, positioned, aligned and secured parts and assemblies with straightedges, squares and calipers.
- Completed minor torch ups with MIG welders.
- Applied shielded metal arc welding techniques with electrodes in flat, horizontal vertical positions as well as overhead applications.
- Operated manual or semi-automatic flame-cutting equipment to cut metal for fabrication of products.
- Constructed templates and jigs for fabrication according to blueprints.
- Troubleshot problems related to welds including porosity issues caused by improper shielding gas flow rates.
- Inspected completed work for conformance to specifications using various instruments.
- Utilized oxyacetylene torches for preheating metals prior to welding or bending them into desired shapes.
- Prepared broken parts for welding by properly grooving and scarfing surfaces.
- Adjusted settings on machines such as current level so it matches the specifications outlined in blueprints and drawings.
- Adjusted gas flow and pressure to create and maintain desired flames.
- Monitored the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
- Communicated effectively with supervisors regarding progress updates on assigned tasks.
- Prepared workpiece edges by grinding, cutting, buffing or bending to verify snug fit.
- Cut, contoured and beveled metal and structural shapes to achieve accurate dimensions.
- Measured workpieces with straightedges or templates to conform with specifications.
- Cleaned and inspected parts and assemblies at each production stage and documented production defects.
- Detected faulty operation of equipment or defective materials and notified supervisors.
- Safely ignited torches and monitored surroundings to proactively identify hazards.
- Recognized, set up, and operated shielded metal arc and gas metal arc welding equipment.
- Connected and turned regulator valves to activate and adjust gas flow and pressure and obtain desired flames.
- Marked or tagged material with job number, piece marks and other identifying marks.
- Selected and installed torches, filler rods and flux according to welding chart specifications.
Pipe Fitter/ Welder
Consolidate Nuclear Security
01.2021 - 06.2022
- Work as part of a team on new commercial construction installing stainless steel, carbon steel, PVC, HTPE and copper pipe.
- Performing a combination of duties to assist in welding, brazing, and thermal and arc cutting activities.
- Perform welding operations on aluminum, stainless steel, and carbon steel.
Welder
Morgan Olson
09.2020 - 01.2021
- Operated welding machines to assemble components for custom vehicle bodies.
- Inspected welds for quality and ensured compliance with safety standards.
- Collaborated with team members to improve welding techniques and processes.
- Maintained tools and equipment to ensure optimal performance during production.
- Interpreted blueprints and technical drawings for accurate fabrication tasks.
- Trained new welders on proper techniques and workplace safety protocols.
- Participated in regular safety meetings to promote a safe work environment.
- Conducted repairs on defective welds to meet production specifications.
- Set up welding machines based on the job at hand.
- Read blueprints, drawings related to projects in order to determine proper dimensions of components being fabricated, welded together.
- Set up equipment and welded parts according to welding chart specifications and type.
- Gathered required materials for each project in order to meet production deadlines.
- Followed safety guidelines through proper machine guarding and lockout and tagout procedures.
- Performed preventative maintenance on welding tools and equipment.
- Scraped off excess spatter using portable grinders and arc-cutting equipment.
- Operated manual and semi-automatic welding equipment in vertical, horizontal and overhead positions.
- Laid out, positioned, aligned and secured parts and assemblies with straightedges, squares and calipers.
- Completed minor torch ups with MIG welders.
- Applied shielded metal arc welding techniques with electrodes in flat, horizontal vertical positions as well as overhead applications.
- Inspected completed work for conformance to specifications using various instruments.
Welder
Pipeslingers Processing
Knoxville
05.2020 - 06.2020
- Inspected welds for quality and ensured compliance with safety standards.
- Collaborated with team members to improve welding techniques and processes.
- Maintained tools and equipment to ensure optimal performance during production.
- Interpreted blueprints and technical drawings for accurate fabrication tasks.
- Participated in regular safety meetings to promote a safe work environment.
- Conducted repairs on defective welds to meet production specifications.
- Maintained a clean working environment by removing scrap metal from work areas.
- Set up welding machines based on the job at hand.
- Repaired broken or cracked parts using cutting torches and welding equipment.
- Read blueprints, drawings related to projects in order to determine proper dimensions of components being fabricated, welded together.
- Used welding skills to help repair and maintain heavy-duty machinery.
- Set up equipment and welded parts according to welding chart specifications and type.
- Gathered required materials for each project in order to meet production deadlines.
- Followed safety guidelines through proper machine guarding and lockout and tagout procedures.
- Fabricated and welded components to assemble structural forms, such as machinery frames, tanks, pressure vessels, and furnace shells.
- Performed preventative maintenance on welding tools and equipment.
- Scraped off excess spatter using portable grinders and arc-cutting equipment.
- Operated manual and semi-automatic welding equipment in vertical, horizontal and overhead positions.
- Laid out, positioned, aligned and secured parts and assemblies with straightedges, squares and calipers.
- Operated manual or semi-automatic flame-cutting equipment to cut metal for fabrication of products.
- Constructed templates and jigs for fabrication according to blueprints.
- Troubleshot problems related to welds including porosity issues caused by improper shielding gas flow rates.
- Prepared broken parts for welding by properly grooving and scarfing surfaces.
Construction Wireman
Service One
09.2019 - 04.2020
- Work on office buildings, plants, and water treatment jobsites.
- Worked installing conduit, motors, switchgear, conductors, and pulling wire.
- Installed, maintained, repaired, and tested equipment for the generation and utilization of electric energy for the job site.
- Participating in the IBEW CW program.
Welder
Southeastern Stainless
11.2018 - 09.2019
- Work as part of a team to finish projects correct and on time.
- Make decisions and use problem-solving skills to resolve fundamental manufacturing issues or seek assistance when needed.
- Performing a combination of duties to assist in welding, brazing, and thermal and arc cutting activities.
- Perform preventative maintenance and safety checks on welding equipment to ensure proper, safe working conditions.
- Perform TIG welding operations on aluminum, stainless steel, and carbon steel.
Construction Laborer
Bulldog Remodeling Co.
05.2018 - 08.2018
- Rough framing, plumbing, electrical, and finish carpentry.
- Assisted in a range of construction projects including demolition, site maintenance and clean up, transportation of materials, and general support of all phases of construction.
- I have gathered experience working with a wide range of construction materials and equipment.
Education
Associate of Applied Science -
Local 102 United Association
Knoxville, TN01-2025
Welding Technology -
Tennessee College of Applied Technology
07-2019
High School Diploma -
Clinton High School
05-2018
Skills
- Piping installation
- Blueprint reading
- Leak detection
- Welding techniques
- Safety compliance
- Team collaboration
- Problem solving
- Equipment maintenance
- Technical advising
- Time management
- Effective communication
- Preventive maintenance
- Troubleshooting systems
- Workflow optimization
- System troubleshooting
- Pipe alignment
- Pipe fitting
- Valve installation
- Pipe support
- Pipe measuring
- Pipe fabrication
- Pipe joining
- Pipe insulation
- Pipe hanger installation
- Pipe threading
- Water heater repair
- Pressure testing
- Drain cleaning
- Pipe welding
- Pipe cutting
- Pipe grooving
- Plumbing repairs
- Blueprints
- Equipment monitoring
- Skilled with both hand and power tools
- Continuous learning commitment
- Preventative maintenance planning
- Inventory management efficiency
- Hand and power tools
- Emergency response readiness
- Air and water piping
- Remodels and new construction
- Basic math aptitude
- Emergency response
- Equipment operation
- Quality production
- Manual rigging installation
- Plumbing
- Commercial construction experience
- Valve repair mastery
- Water heater maintenance
Certification
- OSHA 10 - General Industry Safety and Health, 12/18, Current
- OSHA 10 - Construction Safety and Health, 02/21, Current
Timeline
Plumber Pipefitter
UCOR
03.2023 - Current
Welder
Macaber Engineering
12.2022 - 02.2023
Welder
National Partitons HQ
10.2022 - 11.2022
Millwright
Cherokee Millwright Inc
03.2021 - 04.2023
Pipe Fitter/ Welder
Consolidate Nuclear Security
01.2021 - 06.2022
Welder
Morgan Olson
09.2020 - 01.2021
Welder
Pipeslingers Processing
05.2020 - 06.2020
Construction Wireman
Service One
09.2019 - 04.2020
Welder
Southeastern Stainless
11.2018 - 09.2019
Landscaper
Ridenour Landscaping
05.2018 - Current
Construction Laborer
Bulldog Remodeling Co.
05.2018 - 08.2018
Associate of Applied Science -
Local 102 United Association
Welding Technology -
Tennessee College of Applied Technology
High School Diploma -
Clinton High School